XV Finishes powder coating specialties. Ceramic & Zinc Coatings. Custom part & accessories

This is an Industrial Grade Coating!!!

This product has a High Temperature Rating of 2000 Degrees.
This Product requires curing the part at 500 degrees for 1 hour.

Ceramic Chrome High Temperature Coating


[After Polishing]

Notice: CHROME CERAMIC may be polished by hand using extra fine steel wool (0000) followed by a polishing compound.

This product has a High Temperature Rating of 2000 Degrees.
Partially Cure at  500 Degrees 1/2 Hour. Full Cure at 750 Degrees for 1 Hour
or when Headers are Installed On Vehicle Allowing Heat From Engine To Cure.

High Temperature Black Satin


This product has a High Temperature Rating of 2000 Degrees.
This Product requires curing the part at 500 degrees for 1 hour.

High Temperature Cast Iron


This product has a High Temperature Rating of 2000 Degrees.
This Product requires curing the part at 500 degrees for 1 hour.

High Temperature Aluminum



Zinc Rich Primer coatings are known for outstanding corrosion resistance.

 


Motorcycle
Virago All
front and rear header pipe

$15  ceramic coated [Black satin] [On hold. Catalog said cured at 500f  package says 750f.]
$30  ceramic coated [Chrome un-polished] * The part must be able to withstand baking at 500f for 1 hr.
Chrome Ceramic may be polished by hand using extra fine steel wool (0000) followed by a polishing compound.
You can also use glass bead at 25 psi to achieve a shinny finish.
$75+/- [Chrome polished] *I hate polishing.